|
No. 23
No. 25
Pneumatic cylinder with piston and magnet kit for ram position via cylinder switch
No. 29
Precision lower stop
Height adjustment
|
From 1.6 kN to 43 kN
Throat depth from 86 mm to 200 mm
Working height from 90 mm to 600 mm
Constant force acting over long stroke is characteristical for these direct-action pneumatic presses.
Features:
- Cylinder unit Maintenance-free specially developed for the assembly technology; with flow control for speed regulation of the downstroke.
- Press head unit
The working height can be rapidly & accurately adjusted due to the height adjustment’s ease of use. Can be used without the frame as processing station in automated installations.
- Adjustable ram position in BDC by means of precision lower stop (1 division line = 0.05 mm) on scale
- Ram with precision bore for tool holding and built-in adjustable stop
- Round anti-rotational ram
- Frame with precision machined press head guide rails.
- fixture mounting platen with precision T-slot and bore for tool location.
- T-slot with locking set screw in press table
Applications:
- Assembling, press-insertion into housings with large installation height, bending, dismantling, calibration of axles, bushes, bearings
- Deformation over long paths
|
