Our experienced Engineers welcome you to the www.supra-engineering.com

Product  » MATSUSHIMA » Powder Measurement

Products infomation

POWDER MEASUREMENT

DUST MONITOR

For Detection of leakage of dust collector 
and bag filter breakage

Concentration 
measurement range

0mg/㎥~1000mg/㎥

Gas flow rate

4.0 m/s or greater

Output signal

4 to 20 mADC (500Ω)

Contact output

2 NONC contact for upper limit alarm,
1 NONC contact for fault alarm

Dust Monitor continuously measures for 24 h the dust in exhaust gas at the secondary side of a dust collector or the like and outputs the alarm signal at the abnormal condition and monitors the relative variation of dust amount with an analog signal. It detects the triboelectric charge of dust hitting the sensor probe and make outputs relative to the dust amount. Dust Monitor can be easily mounted on the existing facility to facilitate environmental management.

 

カタログPDF

INTRINSIC SAFETY DUST MONITOR

For Detection of leakage of dust collector 
and bag filter breakage

Enclosure
Concentration
measurement range

Ex ib ⅡB T4 (Intrinsic safety)
0mg/㎥~1000mg/㎥

Gas flow rate

4.0 m/s or greater

Output signal

4 to 20 mADC (500Ω)

Contact output

2 NONC contact for upper limit alarm,
1 NONC contact for fault alarm

 Dust Monitor continuously measures for 24 h the dust in exhaust gas at the secondary side of a dust collector or the like and outputs the alarm contact  at the abnormal condition and monitors the relative variation of dust amount with an analog signal.
The intrinsic safety enclosure enables it to be used in the hazardous area: Zone 1 & 2.

 カタログPDF

 

 

 

 

DUST SWITCH

For detection of broken bag of compact dust collector

Particle size

0.3 micrometer of higher

Velocity

4.0 m/s or higher

Output signal

open collector output (NPN)

   

DUST SWITCH continuously monitors for 24 hours the filter condition of the general-use compact dust collector.  It can quickly detect a very small amount of dust at the abnormality and make the dust leakage known.  As well as DUST MONITOR, it detects the triboelectric charge of dust hitting the detection probe.  DUST SWITCH is working environment protection sensor and can be easily installed on the existing facility.

 

 カタログPDF

 

 

Address : Jl. Pecenongan No. 17 D , Jakarta 10120
Phone: 62-21 3457469 , 3457420 , 3457355, 3457326
FAX: 021-3457318